Polar S510 User Manual download pdf (Page 37)

E 70 E 71

To be able to transfer the recorded training information via SonicLink™

and to analyse it with PC Coach Light software version 3.0 or later, you

need a personal computer with a sound card and microphone. To make

sure that the training information transfer will be successful, check that

there are no interfering sounds near the computer.

1. Start the software.

2. Activate the download function of the software.

3. If the receiver is in the Time of day display scroll up or down until

CONNECT is displayed. Make sure that start is displayed.

4. Bring and hold the back cover of the receiver next to the computer’s

microphone. Keep the back cover of the wrist receiver within 5 cm/ 2"

of the microphone until the SonicLink sound has ceased.

5. Press the OK button to start the data transfer. SonicLink and COM

appear on the display. You will hear a chirping sound (SonicLink) while

the training information is transferred to the computer. You can

monitor the transfer percentage from the receiver’s display. The receiver

returns to the Time of day display after data transfer.

Interrupt the data transfer to the computer by pressing the stop

button during data transfer. CONNECT is displayed.

Uploading Settings from Computer

Polar S510 offers you the option of uploading your settings with PC Coach

Light software version 3.0 or later to the wrist receiver. You are also able to

set a user ID for easier recognition in multi-user situations.

To be able to upload the settings from PC Coach Light software

via Polar Uplink, you need a personal computer with a sound card

(compatible with Sound Blaster™) and dynamic loudspeakers or

earphones.

1. Start the software.

2. If the receiver is in the Time of day display scroll up or down until

CONNECT is displayed.

3. Place the receiver less than 10 cm/ 4" from the loudspeaker.

4. Activate the upload function of the software. Do not move the receiver

during the data transfer.

5. The receiver automatically starts to upload the information as UpLink

and COM appear and you will hear a chirping sound while information

is transferred to the receiver. The receiver returns to the Time of day

display after data transfer.

Manual S510 GBR C.pm6 8.3.2001, 12:4470-71

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

No comments

Polar S510 User Manual Page 37