Polar RC3 GPS User Manual download pdf (Page 9)

3. TRAINING COMPUTER BATTERY

Charging Your Training Computer

The Polar RC3 GPS training computer has an internal, rechargable battery. Use the USB cable included in

the product set to charge the training computer via the USB connector on your computer. If you want to

plug the USB connector to a wall outlet, use a USB power adapter (not included in the product set).

1. Plug the micro USB connector into the USB port of the training

computer.

2. Plug the USB connector into the computer USB port. It is

recommended not to use USB hubs because a USB hub may not

supply enough power for the training computer.

Use a USB 2.0 compliant USB A-to-micro B cable included in the set

package. If you charge from a USB hub, for example, the charging time

might be prolonged.

If you use an AC adapter, make sure that the adapter is marked with

"output 5Vdc 0.5A - 2A max". Only use an AC adapter which is

adequately safety approved (marked with "LPS", "Limited Power

Supply" or "UL listed").

3. The charging animation appears on the display.

When you plug in the training computer for the first time, Windows

searches for drivers automatically. Wait for the driver search to

complete (it takes about one minute). Alternatively you can skip the

search. The charging animation / data transfer is disabled during the

search.

The battery will be 70-80% full after one hour of charging (if the

battery was low). Charging the battery fully takes up to one hour and a

half.

4. When the training computer is fully charged, Charging complete is

displayed. Disconnect the cable.

When you plug the micro USB connector into the USB port of the training computer, be careful not to

scratch the sealing surfaces of the back case. If sealing surface has deep scratches, it will cause loss of

IPx7 grade waterproof level.

After each time of using the USB port of the training computer, check visually that there is no hair, dust

or other dirt on the sealing surface area of the lid/back case. Gently wipe to remove any dirt. Do not use

any sharp tools or equipment for cleaning, which could cause which can cause scratches to the plastic

parts.

Battery operating time

In continuous use When recording a training

session on average 1h/day,

7 days/week

When only time view is used

with the GPS function ON:

up to 12 hours

with the GPS function ON:

11 days

4 months

with the GPS function OFF:

up to 1700 hours

with the GPS function OFF:

120 days

Battery operating time depends on many factors, such as the temperature of the environment in which you

ENGLISH

Training Computer Battery 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Comments to this Manuals

No comments

Polar RC3 GPS User Manual Page 9

Comments to this Manuals

Related products and manuals for Sport watches Polar RC3 GPS